Double Glazing Lock Repairs
Quality locks on your windows and doors will stop burglars from getting into your home. In general, they don't enjoy breaking glass or slipping through windows that are open.
Some double glazing owners, however, have encountered issues with their window or door lock after the installation. Luckily, these problems can be fixed without having to pay for new double glazing.
Broken or Faulty Locks
A locksmith can fix your uPVC window lock or door lock if it's damaged or broken. They can repair the hinges, striker plates and locks on your double glazing. They can also move the cylinder around to correct any misalignment issues which could cause your handle to not operate correctly.
The mechanism could be seized when the key is inserted into the lock, but it does not turn or is difficult to insert. This can be caused by dirt or grime getting stuck within the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. It is crucial to apply a dry lubricant such as teflon or graphite instead of oil which attracts dirt and adhere to the inside of the mechanism. After lubricating the lock, you need to insert the key and try to turn it. The lubricant needs to get into the mechanism, and the lock should spin smoothly.
The loose screws inside the lock mechanism can be another reason for a broken lock. They can become loose and fall out or break completely and stop the lock from working correctly. These screws can be tightened by using a screwdriver, but you must be cautious not to tighten them too much. This could damage the internal components.
A damaged lock can be dangerous for you and your family. This is especially relevant if you have young children. It's possible for them to open the door without your knowledge and give them access to your home. If you are worried about this happening, a licensed locksmith can offer rapid and effective service to secure your double-glazed doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing that can fix any type of defective and broken mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.
Broken or Faulty Handles
As part of their overall security package, many double-glazed windows have a multipoint lock. This is an excellent option for those concerned with potential thieves who may try to gain access to your home. Ask your installer about antilift blocks. They can be installed in addition to existing locks and aid in keeping your windows shut.
It's not uncommon for the handle locks to get damaged or fail. They are the first component of your window that could be forced open by a criminal intent on breaking into. The good news is that this is among the easiest parts to repair.
Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is usually available as an extra on new uPVC window installations. Older uPVC and aluminium handles can be upgraded to lock systems that shoot bolts also as an optional feature on all new double-glazed windows.
It is important to repair a handle as soon as possible after it has been damaged. Faulty handles can prevent the window from closing properly and letting in a draft. It could also be a vulnerability that thieves can exploit and put your family's possessions and you at risk.
To fix the malfunctioning mechanism, you must first gain access to the window frame and then remove the damaged handle. The gearbox is then accessed to determine the kind of gearbox that is used to open the handle. This allows a replacement that matches the profile and internal window frame mechanisms.
After the mechanism is replaced the handle can be put back together using the original screws. However, we recommend replacing them with longer screws since they provide a more secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further corrosion. After that the window will be functional again and at only a fraction of the cost of replacing the entire window.
Hinges that are broken or damaged
If your windows do not close properly, you may experience draughts, the weakening of your home's security barrier and an increased risk of damp or water damage. Broken or defective window hinges are a common issue that can be fixed easily.
If your windows made of uPVC won't open or close and close, it's likely hinges need to be replaced or repaired. Many window companies will require that you purchase an entirely new window unit in order to address this problem, but we can replace the hinges and save you money.
Window hinges are often damaged after repeated use, or they might be damaged by corrosion over time. If you've broken a window hinge, it is essential to take steps to prevent further damage. This includes not forcing the window to open or close.
You can find the correct parts for your hinge by identifying its type. Common types of window hinges include Maco, Mila, Roto and many other brands. It is recommended to consult a professional in this case to avoid the mistake of buying parts that are not compatible with your current hardware and cause further damage.
The hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be the main source of noise and could also allow water to enter your windows.
To resolve this issue, first verify that the pin barrel on both hinge halves is aligned. If it isn't, tap the head pin with the hammer to create a small bend in the barrel of the hinge. This will help keep the pin in the right position. Ask a second person to hold the door while you remove the hinges and hinges from both the doorjamb as well as the door. Replace the hinges and install screws with glue. Finally fix the hinges using clamps or weights until the glue is drying.
Once the hinges have been fixed after which you will be able to re-install the door and re-attach the handle. It is recommended to replace the screws using the same length of dowels as the screw that was originally used so that they are in line with each other.
Broken or Faulty Glass
While uPVC windows do a great job of keeping cold out and heat in, they can become damaged over time. This could include cracked or damaged glass and faulty locks. If neglected, this could become a very costly issue. This can also detract from the appearance of your home and can lead to a loss in insulation. It is important to fix any damage as soon as it occurs.
If your glass has cracked, but not broken it is usually possible to repair it yourself using the appropriate tools and techniques. First, make double glazing repairs near me that the surrounding area around the glass is clear so that any shards won't injure anyone and aren't an accident hazard. Then, remove all broken glass pieces and dispose of them in a proper way. Then, apply masking tape to the entire area to prevent pieces of glass from scattering and sticking to your skin when you move them. Pre-fitting the glass pane before applying glue is recommended in the case of a window that has two panes. This will ensure you have enough room to finish your project.
Before applying the glue wipe the surface of the broken frame and the glass with a an unclean, dry cloth. Follow the directions for application and curing time, which can vary from product to product. Based on the angle of the crack, you may need to hold the glass to hold it in place while it is curing. You can do this using lightweight clamps designed to hold fragile materials.
After the adhesive has completely set, carefully place the glass inside the window frame. Make sure that it is flush with the frame edge and that there aren't any gaps between the glass sash and frame. Avoid bending the glass as you put it back in place, as this could weaken the seal. This could result in condensation or water infiltration.
Contact a professional glazier like O'Brien(r) to arrange an appointment to replace your glass if the window has been completely broken. Unattended handling of broken glass can be a risk to pets and children, so it's essential to act swiftly.